Atwood W/H Repair Parts

Atwood 1400W 120V screw-in type high watt density water heater elements can be used in most Atwood water Heaters. It is an Original Equipment Replacement Element. • High Watt Density Heating Element• 120V/1400W• UL Listed• Easy to Install• Minimum tank...

Camco's 1500W 120V screw-in type high watt density water heater elements can be used in most replacement situations of the same wattage and voltage. High Watt Density elements are the most common and the same type of element provided with most new water...

Camco Zinc Plated Steel Water Heater Door Latch works with all brands of RV Water Heaters using this latch or a similar one. The spring loaded design makes it easy open or close the water heater door. The zinc plated steel will outlast the cheap plastic...

Atwood 1/2 Male Pipe Thread Drain Plugs for Atwood RV Water Heaters 2 per pack New Dometic Water Heaters Use a 1/2" Male Cap.

Fits Atwood XT Water Heaters 80-8709 (90073), 80-8707 (90071) Fits Atwood Electric Ignition Water Heaters 80-1364 (96163) (GCH6AA-10E), 80-1326 (96136) (GH6-8E), 80-1350 (96121) (G6A8E) Fits Atwood Pilot Water Heaters 80-1346...

Fits Atwood XT Water Heaters 80-8709 (90073), 80-8707 (90071) Fits Atwood Electric Ignition Water Heaters 80-1364 (96163) (GCH6AA-10E), 80-1326 (96136) (GH6-8E), 80-1350 (96121) (G6A8E) Fits Atwood Pilot Water Heaters80-1346 (96110)...

Camco Anode Rod for 10 Gallon Atwood RV Water Heaters - Extend the life of a water heater by attracting corrosive elements in the water, protecting your tank and elements from corrosion. 9.5" Long 1/2" Male Pipe Thread

Camco Anode Rod for 6 Gallon Atwood RV Water Heaters - Extend the life of a water heater by attracting corrosive elements in the water, protecting your tank and elements from corrosion.

Camco/Atwood Pressure Relief Valve - 1/2" Thread - This is a Camco Replacement pressure relief valve that fits most Atwood water heaters that require the 1/2" male pipe thread fitting. No other parts should be need to replace this valve. If you are going...